Experimental Prototype Plate Remo the PET-Wood Demolition by Marcelo Ambrogi - Taubaté - SP - Brazil - 2012.

Experimental Prototype Plate Remo the PET-Wood Demolition by Marcelo Ambrogi - Taubaté - SP - Brazil - 2012.Made with wood lath roof, with 68 (sixty eight) 2-liter PET bottles, tied the string on top of an oval platform of wood where the bottles are stuck in the horizontal direction.The tie is made of a 2 liter PET bottles and only in the spaces. With a length of approximately 4000 mm x 1150 mm with a depth of 100 mm and secured only with nylon rope.Experimental project in the assembly phase, with the first prototype chip moorings.Important Note: When using disposable or recyclable material in the construction of the experimental vessel of the board will have to be careful and use as much attention as possible on the issue of navigation and also the safety of the vessel, and not so do not build anything without a qualified professional and knowledgeable in the industry nautical engineering. This taking into consideration the technical quality of each component of the vessel. If you have questions do not build, do nothing you are not sure.Looking at the moorings on the basis of PET bottles plank of wood placed on coverage of oval structure.Okay tied with nylon rope and adjusted as needed and the mold followed by plate length of 4000 mm by 1150 mm, depending on this still further moorings of the bottles.Painting:Now painting the structure before placing the PET, after assembly and the anchor parts. I tie the beginning of the bottles by the media in order to balance the whole, do the tie between the bottles also providing a stable support in relation to the platters and sides.
Taubaté, July 6, 2012.
Experimental Prototype Plate Remo the PET-Wood Demolition by Marcelo Ambrogi - Taubaté - SP - Brazil - 2012.
http://www.youtube.com/watch?v=862G4DOPe7A&feature=player_embedded